Linux version 2.4.2-2 (root@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001
BIOS-provided physical RAM map:
 BIOS-e820: 000000000009f800 @ 0000000000000000 (usable)
 BIOS-e820: 0000000000000800 @ 000000000009f800 (reserved)
 BIOS-e820: 0000000000015400 @ 00000000000eac00 (reserved)
 BIOS-e820: 0000000003ef0000 @ 0000000000100000 (usable)
 BIOS-e820: 000000000000fc00 @ 0000000003ff0000 (ACPI data)
 BIOS-e820: 0000000000000400 @ 0000000003fffc00 (ACPI NVS)
 BIOS-e820: 0000000000080000 @ 00000000fff80000 (reserved)
On node 0 totalpages: 16368
zone(0): 4096 pages.
zone DMA has max 32 cached pages.
zone(1): 12272 pages.
zone Normal has max 95 cached pages.
zone(2): 0 pages.
zone HighMem has max 1 cached pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=303 BOOT_FILE=/boot/vmlinuz-2.4.2-2
Initializing CPU#0
Detected 647.197 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1291.05 BogoMIPS
Memory: 61972k/65472k available (1365k kernel code, 3112k reserved, 92k data, 236k init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9be, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI: Found IRQ 11 for device 00:04.0
PCI: The same IRQ used for device 00:04.1
PCI: The same IRQ used for device 01:01.0
PCI: Cannot allocate resource region 4 of device 00:07.1
  got res[1080:108f] for resource 4 of Intel Corporation 82371AB PIIX4 IDE
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 41064kB/13688kB, 128 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1080-0x1087, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1088-0x108f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DJSA-210, ATA DISK drive
hdc: _NEC CD-2800D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 19640880 sectors (10056 MB) w/384KiB Cache, CHS=1222/255/63, UDMA(33)
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10d
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 236k freed
Adding Swap: 361420k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 20:53:29 Apr  8 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0x1060, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x2001/0x4000) is not claimed by any active driver.
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
SMSC chip at EFER=0x370 key=0x55 devid=29 devrev=00
SMSC unknown chip type
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 7
0x378: readIntrThreshold is 7
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x40
0x378: ECP settings irq=<none or set by other means> dma=<none or set by other means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
ip_conntrack (511 buckets, 4088 max)
kaweth.c: Driver loading
usb.c: registered new driver kaweth
kaweth.c: Kawasaki Device Probe (Device number:2): 0x2001:0x4000:0x0202
kaweth.c: Device at c1272000
kaweth.c: Descriptor length: 12 type: 1
kaweth.c: Resetting.
kaweth.c: kaweth_reset(c13cc000)
kaweth.c: kaweth_control()
kaweth.c: kaweth_reset() returns 0.
kaweth.c: Firmware present in device.
kaweth.c: Reading kaweth configuration
kaweth.c: kaweth_control()
kaweth.c: Statistics collection: 13fbffff
kaweth.c: Multicast filter limit: 80
kaweth.c: MTU: 1514
kaweth.c: Read MAC address 00:e0:98:7c:bd:a9
kaweth.c: Setting URB size to 1664
kaweth.c: kaweth_control()
kaweth.c: Set SOFS wait to 5
kaweth.c: kaweth_control()
kaweth.c: Set receive filter to 28
kaweth.c: kaweth_control()
kaweth.c: Initializing net device.
kaweth.c: kaweth interface created at eth0
kaweth.c: Kaweth probe returning.
kaweth.c: Dev usage: 1
kaweth.c: Opening network device.
kaweth.c: Setting Rx mode to 28
kaweth.c: Setting Rx mode to 28
kaweth.c: Setting Rx mode to 28
kaweth.c: kaweth_control()
kaweth.c: in_interrupt()
kaweth.c: Failed to set Rx mode: -16
kaweth.c: Setting Rx mode to 28
Dev usage: 1<7>kaweth.c: Dev usage: 1
kaweth.c: Opening network device.
kaweth.c: kaweth_control()
kaweth.c: Set Rx mode to 30
kaweth.c: Setting Rx mode to 28
kaweth.c: Setting Rx mode to 28
kaweth.c: Setting Rx mode to 28
kaweth.c: kaweth_control()
kaweth.c: in_interrupt()
kaweth.c: Failed to set Rx mode: -16
Linux PCMCIA Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:04.0
PCI: The same IRQ used for device 00:04.1
PCI: The same IRQ used for device 01:01.0
PCI: Found IRQ 11 for device 00:04.1
PCI: The same IRQ used for device 00:04.0
PCI: The same IRQ used for device 01:01.0
Yenta IRQ list 0698, PCI irq11
Socket status: 30000006
Yenta IRQ list 0698, PCI irq11
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
maestro3: version 1.22 built at 20:53:18 Apr  8 2001
PCI: Found IRQ 5 for device 00:08.0
PCI: The same IRQ used for device 00:08.1
maestro3: Configuring ESS Allegro found at IO 0x1400 IRQ 5
maestro3:  subvendor id: 0x0012103c
ac97_codec: AC97 Audio codec, id: 0x4583:0x8308 (ESS Allegro ES1988)
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12